FAQ

What is the password of user architech?

  Host    select

architech

What is sudo?

sudo is a program for Unix-like computer operating systems that allows users to run programs/commands with the security privileges of another user, normally the superuser or root. Not all the users can call sudo, only the sudoers, architech user is a sudoer. When you run a command preceeded by sudo Linux will ask you the user password, for architech user the password is architech.

What is the password for user root?

  Host    select

root

When should I use an external power supply?

Pengwyn Board can be powered directly from the USB connector, the power consumption is about 250mA without any option installed. When powered from USB, the board can supply enough current to a USB keyboard (or a USB mouse) and to the DVI interface. If you want to connect something more power hungry to the USB port, we suggest you to power the board with an external power supply or to use externally powered USB devices.

The first time I ran the virtual machine I obtained an error related to the Ethernet controller. What can I do?

We used a Realteck Ethernet controller when we built the virtual machine, if you have a different one is not a problem, click on change network settings and insert the proper configuration for your machine.

My build is taking too long, what can I do to optimize?

Please, refer to:

• How to speedup the build process Section of Chapter How to use HOB, and/or
• How to speedup the build process Section of Chapter How to use Poky.

When I try to create the SD card something goes wrong, what can I do?

The simplest reason could be that the SD card is write protected or locked, please double check that.

How do I enable commercially licensed recipes?

Commercially licensed recipes are disabled by default. Your conf/local.conf file, contained in your build directory (by default is /home/architech/architech_sdk/architech/pengwyn/yocto/build/), has a (commented) line starting with:

  Host    select

# LICENSE_FLAGS_WHITELIST

uncomment it (delete # symbol).

For the details, please refer to the official Yocto Project documentation.

How do i know which drivers are included?

• If you have built an image then you can go in ~/architech_sdk/architech/pengwyn/yocto/build/tmp/work/pengwyn-poky-linux-gnueabi/linux-pengwyn-3.2-r0/linux-pengwyn_3.2/drivers. In this directory there are all kernel linux drivers.
• If you haven’t build an image then use following commands:

  Host    select

~$ mkdir -p /home/architech/Documents/linux-kernel
~$ cd /home/architech/Documents/linux-kernel
~/Documents/linux-kernel$ cp /home/architech/architech_sdk/architech/pengwyn/yocto/poky/meta-silica/recipes-kernel/linux/linux-pengwyn-3.2/linux-pengwyn* .
~/Documents/linux-kernel$ tar -xzf linux-pengwyn_3.2.tar.gz
~/Documents/linux-kernel$ patch -p1 -d linux-pengwyn_3.2 < linux-pengwyn_3.2.patch
patching file ...
~/Documents/linux-kernel$ cd linux-pengwyn_3.2/drivers

In this directory there are all kernel linux drivers.

• Another metod is using the menuconfig of linux. In linux-pengwyn_3.2 directory use the command:

  Host    select

make menuconfig

Once opened go in Device Drivers.

I have problems to create a patch for the kernel. How can I do that?

If you have already built the kernel before modify it, you need purge all file objects. To do this use the following command:

  Host    select

make ARCH=arm mrproper

will cleanup totally the sources. See How to customize the Linux Kernel for details.

How do I include QWebView widget in my project? The compilation fails

Open your .pro project file and add a new line under QT += core gui:

  Host    select

QT += webkit

I have problems with internet connection

If yuor company uses proxy then read this page to configure correctly yocto: Working Behind a Network Proxy.

I have builded a package but I do not see it in opkg list. Why?

Please, refer to How to update the repository in the vm